Introduction of continuous production line for colorsteel sandwich panel 　　This production line is to manufacture polyurethane-or phenol-laminated sandwich panel with color-steel facings for building purposes, by which colorsteel double-sided wall panels and roof panels or panels of colorsteel on one side and flexible facing on the other side can also be produced. Click here： Introduction of Discontinuous Production Line of Color-steel-sided Sandwich Panels 　　The Packaged Equipment is used for discontinuous production of PU-laminated sandwich panels with color steel, paper or galvanized facings. Refer to the panel form diagram for details of panel form. The maximum length of panel that can be made is 6,000 mm while the thickness is ranging from 50 to 250mm. With a transitional padding plate, panels of 20 mm in thickness can also be produced. Talking about 50mm-thick panels, the equipment's production capacity is 480 square meters per eight hours. The equipment can also be utilized to make sandwich panels of other forms as long as the forming machine gets changed. Click here： Introduction of Production Line of Sandwich Door 　　This production line is used to produce sandwich panels for making automatic doors with the middle layer of rigid polyurethane foam and with aluminum sheet or colorsteel sheet as the top and bottom face layers. The laminated panel is between 30 and 100 mm in thickness, 350~700mm in width, length determined by the customer. Click here： Introduction of continuous production line for aluminum sandwich panel 　　This production line is mainly applied to manufacture polyurethane-or phenol-laminated sandwich panel with aluminum foil facings used for making central air-conditioning ducts, which can also manufacture the panels with flexible facings such as brown paper, aluminum foil reinforced paper, etc. Click here： Introduction of Continuous production line for end caps of PU filter 　　This machine, being a critical equipment of producing filter element, serves to make PU filter end caps and seals of various shapes like round, square, and ellipse in a continuous way. Click here： Horizontal cutting machine for rigid foam 　　The machine is applicable to slice rigid (i.e. for vehicle ceiling use, using band cutter) or half-rigid thermoplastic PU products and PU rigid-foam with thick facings (i.e. insulating panel, using sawtooth cutter). Click here：